Thrust Roller Bearing

Thrust roller bearings can accommodate heavy axial loads.Thrust roller bearings are available of the following design variants:
   Single direction bearings with cylindrical rollers and a brass or steel solid cage. 

   Single direction bearings with double-row cylindrical rollers and a brass or steel solid cage. Two short rollers with different lengths are assembled into the pocket of the cage instead of one long roller in order to avoid slippage. 

   Double direction bearings with cylindrical rollers and a brass or steel solid cage. Axial load in both directions can be carried.

   Single direction bearings with taper rollers, ribs on shaft washer and housing washer with a solid cage, declining raceways on both washers for the rollers. 

   Single direction bearing with full complement taper rollers, one ring with rib and the other is fat ring. This bearings mianly be used to carry heavy loads and easyly for mounting and assembling.

   Bearings with spherical rollers and solid or pressed steel cage. The bearings can take heavy axial and light radial loads. They allow higher rotational speeds then the other kinds of thrust roller bearings. The bearings are self-aligned  relative to the centre of spherical housing washer raceway.